Carbon Engine Cleaning

As part of the multitude of complex engine management faults we solve at Remap-UK, one of the most common offenders is DPF problems, blocked inlet tracts (swirl flaps, egr valves etc), and previously, depending on the level of blockage and type of carbon mass build up, there was no alternative to component removal for cleaning or replacement and partial engine strip to rectify and remove the carbon build up.

Modern engine design, coupled with a drive to reduce harmful emissions, has led to a significant increase in these contamination related issues such as

Blocked DPF’s (diesel Particulate filters)
Fouled Fuel Injectors
MOT emission failures

Remap-UK's Carbon Cleaning Machine allows you to get these issues fixed with a minimum of fuss and have access to a preventative maintenance solution. 
We are confident in most cases of dpf blockage, inlet tract narrowing, or poor compression running issues we can resolve 90% of these cases without DPF/FAP replacement or removal, and with minimal levels of strip down/intrusion.

Cleaning the carbon from your car’s engine every once in a while is a very good idea, giving you the benefits of increased performance, improved fuel economy and the reduced likelihood of a breakdown as well as benefits to the environment due to the reduction in harmful emissions.

Any vehicle that has covered more than 10,000 miles, or is used regularly for ’round town’ driving, benefits from having a “Carbon Clean” – particularly Diesel vehicles fitted with DPF’s.

A typical carbon clean will improve fuel economy by 10%, saving the average motorist approximately £200 per year in improved fuel economy. Our prices start from just £60! Can you afford not too get your vehicle Carbon Cleaned?

How does it work?

Low voltage electric current is used to split the water by electrolysis into its components, hydrogen and oxygen gas, in a form referred to as HHO. Pure water has high resistance so to allow electric current to flow easily an electrolyte (potassium hydroxide, KOH) is added to the water. A large bubbler filled with water cleans the gases and serves as a flashback arrestor. Only clean HHO gas flows out to clean the engine. 
HHO gas is highly effective in removing carbon deposits inside the engine using a simple procedure that requires no engine dismantling. All that is required is for the air filter to be removed during the procedure and the Carbon Cleaner connected to a DC power supply such as the vehicles battery:-.
The engine is brought up to normal operating temperature
The air filter is removed
HHO gas is fed into the air intake.
The engine is left idling for approx. 40 minutes with occasional revving, during which the carbon deposits are progressively removed and pass out through the exhaust pipe. The combination of hydrogen and oxygen enrichment gives a high temperature burn that gently loosens & burns off carbon deposits. Water vapour and carbon is carried out in the exhaust. Simple Fast and Effective

Cleans pistons crowns, valves, maintains EGR valves
Restores performance
Reduces emissions
Improves bhp and mpg.
Simple process